|
Адсорбційне осушення
Огляд обладнання
CR
CR.B
CRP
CRT
CR.LK
|
The CR.LK range of dehumidifiers features an air-cooled condenser. There are 7 different models in the range.
This type of Cotes dehumidifier is used in installations where it is not possible to mount ducts for regeneration air, and where the connected effect is therefore used by the room, in the form of heat.
The Cotes CR.LK range of dehumidifiers works on the principle that regeneration air is in a closed circuit, and this air is then cooled using the air present in the room. With this range, the dehumidifier functions as a condensation dehumidifier, but with the characteristics of an adsorption dehumidifier and without CFC gases. This method is particularly effective at temperatures below 20°C.
The water from the dehumidification process condenses in the dehumidifier’s heat exchanger, after which this water is led to the drainage system.
-
Water left over from dehumidification is led to the drainage system
-
No mounting of ducts for regenerated air
-
All added energy is transferred to the room in the form of heat
-
Deep drying at the specified air volume
-
Effective and washable silica gel rotor
-
Separate airflows for process air, regenerated air and cooling air (3 ventilators)
-
Effective rotor gaskets ensure high effect level
-
Sufficient pressure available for connection of ducts
-
Filter cartridges for process air inlet
-
Easy access for service and maintenance
-
A complete unit that includes integrated electrical system
Model example: CR300LK
 |
 |
-
CR110LK
Cotes CR.LK units are made of stainless steel with a built-in air cooled condenser. They are designed for use in closed spaces where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
0.57
Weight kg
35
Dimensions mm
L530, W347, H670
|
|
 |
|
-
CR160LK
Cotes CR.LK units are made of stainless steel with a built-in air cooled condenser. They are designed for use in closed spaces where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
0.9
Weight kg
70
Dimensions mm
L652, W441, H906
|
|
 |
|
--
CR300LK
Cotes CR.LK units are made of stainless steel with a built-in air cooled condenser. They are designed for use in closed spaces where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
1.9
Weight kg
85
Dimensions mm
L872, W400, H955
|
|
 |
|
----
CR600LK
This model is part of the bigger dehumidifier units, with an air cooled condenser. They are designed for use where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
3.8
Weight kg
150
Dimensions mm
L1125, W600, H1335
|
|
 |
|
----
CR750LK
This model is part of the bigger dehumidifier units, with an air cooled condenser. They are designed for use where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
4.3
Weight kg
150
Dimensions mm
L1125, W600, H1335
|
|
 |
|
-----
CR900LK
This model is part of the bigger dehumidifier units, with an air cooled condenser. They are designed for use where there is no opportunity for mounting ducts for the regeneration air.
|
| Читайте о адсорбции> |
|
|
Capacity kg/h
5.3
Weight kg
268
Dimensions mm
L1320, W600, H1635
|
|
|
| |
Печать
|
Новини
Як підібрати
Рішення
Обладнання
|
|
|
